Specificatii Tehnice Tabla Cutata
Dimensiuni utile, cote de debitare, grosimi otel si fise tehnice pentru cele peste 50 de profile de la Bilka, Blachotrapez, BP2, Ludwik, Metigla, RoofArt, Rufster, Viking Pruszynski si Wetterbest.
1. Caracteristici Generale & Criterii de Selectie
Grosimea tablei de otel
Variaza intre 0.25 mm si 1.50 mm, in functie de cerintele de rezistenta.
Aplicatii uzuale:
- Garduri, sageac si placari interioare: 0.30 mm – 0.45 mm.
- Acoperisuri de case, garaje, anexe: 0.45 mm – 0.50 mm.
- Hale industriale si invelitori portante: 0.60 mm – 1.50 mm.
Lungimea foilor debitate
Se taie direct din rulou la dimensiunea solicitata pe proiect.
Dimensiunile variaza de la 0.3 metri pana la 13.5 metri (sau chiar pana la 15 m la profilele TVP 150), eliminand pierderile de debitare si suprapunerile transversale pe acoperis.
Stratul de acoperire & finisaje
Disponibile in variante adaptate bugetului si mediului de exploatare:
- Galvanizat / Zincat la cald: 140–275 g/mp zinc, argintiu.
- Aluzinc: aliaj aluminiu-zinc cu protectie anodica superioara.
- Poliester Lucios (25 µm): finisaj neted si rezistent.
- Poliester Mat Structurat (35 µm): aspect elegant, texturat.
- Poliuretan / GrandeMat / PUR (50–55 µm): rezistenta maxima UV si coroziune.
Garantie & Durata de viata
Durata de viata estimata intre 40 si 60 de ani, insotita de garantii tehnice de la 10 la 50 de ani in functie de stratul de protectie ales si clasa otelului.
2. Tabel Comparativ pe Fiecare Model & Producator
Consulta dimensiunile utile exacte pentru a calcula numarul necesar de coli pe santier.
Ghid de citire a dimensiunilor:
Latimea utila (acoperire efectiva): este dimensiunea reala care se foloseste in calculul necesarului de tabla. Ea scade suprapunerea laterala a colilor vecine.
Latimea totala: latimea fizica bruta a colii fabricate inainte de montaj.
| Producator | Model Tabla | Inaltime Cuta | Latime Totala | Latime Utila | Grosimi Otel | Lungime Maxima | Panta Min. | Documentatie |
|---|---|---|---|---|---|---|---|---|
| Bilka | S18 Sinus Profil sinusoidal/ondulat. | 18 mm | 1100 mm | 1050 mm | 0.4–0.6 mm | 500–13500 mm | Nespecificat in sursa | |
| Bilka | T8 Pagina include si varianta T8 ventilat (grosime 0,4–0,6 mm), cu aceeasi geometrie de baza. | 8 mm | 1200 mm | 1180 mm | 0.3–0.6 mm | 500–13500 mm | Nespecificat in sursa | |
| Bilka | T12 Doua variante de latime. Imaginea este bannerul original de produs publicat ca vizual principal al paginii. | 12 mm | 1140 / 910 mm | 1080 / 860 mm | 0.3–0.4 mm | 500–13500 mm | Nespecificat in sursa | |
| Bilka | T18 Profilare T18 P pentru fatada si T18 A pentru acoperis; aceeasi familie geometrica. | 18 mm | 1150 mm | 1100 mm | 0.4–0.7 mm | 500–13500 mm | Nespecificat in sursa | |
| Bilka | T35 Panta minima: 8° fara imbinari diagonale; 14° cu imbinari diagonale. Disponibila si cu membrana anticondens DR!PSTOP. | 35 mm | 1085 mm | 1065 mm | 0.4–1.0 mm | 500–13500 mm | 8° | |
| Bilka | T45 Panta minima: 8° fara imbinari diagonale; 14° cu imbinari diagonale. | 45 mm | 1010 mm | 980 mm | 0.4–1.0 mm | 500–13500 mm | 8° | |
| Bilka | T 60 | 60 mm | 980 mm | 940 mm | 0,50 – 1,25 mm | 1000 – 13500 mm | 5° | |
| Bilka | T 85 | 85 mm | 1130 mm | 1090 mm | 0,75 – 1,25 mm | 1000 – 13500 mm | 3° | |
| Bilka | T 135 | 135 mm | 964 mm | 930 mm | 0,75 – 1,25 mm | 1000 – 13500 mm | 3° | |
| Blachotrapez | T-8 | 7.2 mm | 1200 mm | 1170 mm | otel 0.4–0.5 mm; aluminiu 0.6 mm | max. recomandat 6000 mm | Nespecificat | |
| Blachotrapez | T-18 Plus | 16.5 mm | 1180 mm | 1127 mm | otel 0.5–0.75 mm; aluminiu 0.6 mm | max. recomandat 12000 mm | Nespecificat | |
| Blachotrapez | T-35 Plus | 34 mm | 1095 mm | 1065 mm | 0.5 – 1.0 mm | max. recomandat 12000 mm | Nespecificat | |
| Blachotrapez | T-50 | 49 mm | 1098 mm | 1047 mm | 0.5 – 1.0 mm | max. recomandat 12000 mm | Nespecificat | |
| BP2 | T7 | 7 mm | aprox. 1210 mm | 1177 mm | 0.5 – 1.0 mm | max. 6000 mm | Nespecificat | |
| BP2 | T14 | 13 mm | aprox. 1161 mm | 1100 mm | 0.5 – 1.0 mm | max. 8000 mm | Nespecificat | |
| BP2 | T18 | 17 mm | aprox. 1125 mm | 1075 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| BP2 | T18 ECO | 17 mm | aprox. 1173 mm | 1125 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| BP2 | T35 | 34 mm | aprox. 1106 mm | 1065 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| BP2 | T35 ECO | 34 mm | aprox. 1120 mm | 1080 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| BP2 | T50 | 47 mm | aprox. 1100 mm | 1055 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| BP2 | T55 | 53 mm | aprox. 1054 mm | 1020 mm | 0.5 – 1.0 mm | max. 12000 mm | Nespecificat | |
| Ludwik Profil | T8 | 8 mm | 1200 mm | 1180 mm | 0.30 – 0.50 mm | 500 – 13500 mm | Nespecificat | |
| Ludwik Profil | T18 | 18 mm | 1150 mm | 1100 mm | 0.30 – 0.50 mm | 500 – 13500 mm | Nespecificat | |
| Ludwik Profil | T18 Sinus | 18 mm | 1025.9 mm | 988 mm | 0.30 – 1.50 mm | 500 – 13500 mm | Nespecificat | |
| Ludwik Profil | T35 | 35 mm | 1100 mm | 1060 mm | 0.40 – 1.00 mm | Debitabil la comanda | Nespecificat | |
| Ludwik Profil | T45 | 45 mm | 1040 mm | 1000 ±5 mm | 0.40 – 1.00 mm | Debitabil la comanda | Nespecificat | |
| Metigla | ONDU18 | 18 mm | 1050 mm | 988 mm | 0.45 | 0.50 | 0.60 | 0.75 mm | 1500 – 12500 mm | 7° | |
| Metigla | ONDU18 Curb | 18 mm | 1050 mm | 912 mm | 0.60 | 0.75 mm | 1500 – 3500 mm | 7° | |
| Metigla | TC15 | 14 mm | 1195 mm | 1110 mm | 0.50 | 0.60 mm | 1500 – 6000 mm | 8° / 14° | |
| Metigla | TR8 | 8 mm | 1200 mm | 1170 mm | 0.50 | 0.60 mm | 1500 – 5800 mm | 20° | |
| Metigla | TR30 | 26 mm | 1160 (R) / 1135 (F) mm | 1100 mm | 0.45 | 0.50 | 0.60 | 0.75 mm | 1500 – 12500 mm | 7° | |
| Metigla | TR35 | 33 mm | 1090 (R) / 1070 (F) mm | 1035 mm | 0.45 | 0.50 | 0.60 | 0.75 mm | 1500 – 12500 mm | 7° | |
| Metigla | TR45 | 45 mm | 1045 (R) / 1040 (F) mm | 1000 mm | 0.45 | 0.50 | 0.60 | 0.75 mm | 1500 – 12500 mm | 7° | |
| RoofArt | T8 | 7 ± 1 mm | 1210 mm | 1180 mm | 0.40 – 0.53 mm | 300 – 6000 mm | 14° | |
| RoofArt | T18 | 18 mm | 1150 mm | 1100 mm | 0.40 – 0.53 mm | 300 – 6000 mm | 14° | |
| Rufster | R8 A / R8 F | 8 mm | 1191 mm | 1160 mm | 0.45 | 0.50 | 0.55 | 0.60 mm | 1000 – 6000 mm | Nespecificat | |
| Rufster | R12 A / R12 F | 12 mm | 1200 mm | 1175 mm | 0.45 | 0.50 | 0.55 | 0.60 mm | 1000 – 5000 mm | 10° | |
| Rufster | R18 A / R18 F | 18 mm | 1170 mm | 1135 mm | 0.45 | 0.50 | 0.55 | 0.60 mm | 1000 – 5000 mm | 10° | |
| Rufster | R35 A | 35 mm | 1080 mm | 1030 mm | 0.45 | 0.50 | 0.55 | 0.60 | 1.00 mm | 1000 – 6000 mm | 14° | |
| Rufster | R35 F | 35 mm | 1095 mm | 1030 mm | 0.45 | 0.50 | 0.55 | 0.60 | 1.00 mm | 1000 – 6000 mm | Nespecificat | |
| Viking Pruszynski | T6 | 6 mm | 1233 / 970 mm | 1179 / 917 mm | 0.50 / 0.70 mm | 0.5 m; max. 0.5mm – 4 m | Nespecificat | |
| Viking Pruszynski | T8 | 8 mm | 1220 mm / 980 mm | 1156 mm / 920 mm | 0.50 / 0.70 mm | 0.5 m; max. 0.50mm – 6 m, 0.70mm – 7 m | Nespecificat | |
| Viking Pruszynski | T14 | 14 mm | 1157 mm | 1120 mm | 0.50 / 0.70 mm | 0.5 m; max. 0.50mm – 6 m, 0.70mm – 7 m | Nespecificat | |
| Viking Pruszynski | T18 | 18 mm | 1173 mm | 1128 mm | 0.50 / 0.70 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 9 m | Nespecificat | |
| Viking Pruszynski | T18 DR | 18 mm | 1137 mm | 1100 mm | 0.50 / 0.80 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 9 m | Nespecificat | |
| Viking Pruszynski | T18 Galvanizat | 18 mm | 913 mm | 870 mm | 0.50 / 0.80 mm | 0.5 m; max. 0.50mm – 4 m, 0.70mm – 8 m | Nespecificat | |
| Viking Pruszynski | T20 | 20 mm | 1105 mm | 1040 mm | 0.50 / 0.75 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 9 m | Nespecificat | |
| Viking Pruszynski | T35E | 35 mm | 880 / 1090 mm | 840 / 1050 mm | 0.50 pana la 1.00 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 12 m | Nespecificat | |
| Viking Pruszynski | T40 | 40 mm | 1098 mm | 1064 mm | 0.50 pana la 1.00 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 12 m | Nespecificat | |
| Viking Pruszynski | T45 | 45 mm | 1040 / 825 mm | 980 / 784 mm | 0.50 pana la 1.00 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 12 m | Nespecificat | |
| Viking Pruszynski | T45P | 45 mm | 1047 mm | 1000 mm | 0.50 pana la 0.70 mm | 0.5 m; max. 0.50mm – 9 m, 0.70mm – 12 m | Nespecificat | |
| Viking Pruszynski | T50 | 50 mm | 1085 mm | 1056 mm | 0.50 pana la 1.25 mm | 0.5 m; max. 0.5mm la 10 m, 0.7mm pana la 12 m | Nespecificat | |
| Viking Pruszynski | T55P | 55 mm | 980 mm | 940 mm | 0.50 pana la 1.25 mm | 0.5 m; max. 0.50–10 m, 0.70–12 m | Nespecificat | |
| Viking Pruszynski | T84 | 50 mm | 1100 mm | 1058 mm | 0.50 – 1.25 mm | 0.5 m; max. 10 / 12 m | Nespecificat | |
| Viking Pruszynski | TP26 SUPER | 26 mm | 1114 mm | 1090 mm | 0.50 pana la 0.70 mm | 0.5 m; max. 0.50mm – 6 m, 0.70mm – 7 m | Nespecificat | |
| Viking Pruszynski | TVP 20 | 20 mm | 1100 mm | 1040 mm aprox. | 0.50 mm / 0.70 mm | 0.5 m; max. 0.5mm – 8m, 0.7mm – 9m | Nespecificat | |
| Viking Pruszynski | TVP 35 | 35 mm | 1090 mm | 1035 mm aprox. | 0.50 mm / 0.70 mm | 0.5 m; max. 0.5mm – 9 m, 0.7mm – 12 m | Nespecificat | |
| Viking Pruszynski | TVP 150 | 150 mm | 868 mm | 840 mm | 0.75 / 0.80 / 0.88 / 0.90 / 1.00 / 1.15 / 1.20 / 1.25 / 1.50 mm | 1200 – 15000 mm | Nespecificat | |
| Wetterbest | JI 45 | 45 mm | 1055 mm | 1000 mm | 0.45 – 1.00 mm | 400 – 12500 mm | 5° | |
| Wetterbest | JIS 16,5 | 16.5 mm | 1155 mm | 1100 mm | 0.40 – 0.60 mm | 500 – 12000 mm | 5° | |
| Wetterbest | JIS 35 | 35 mm | 1075 mm | 1035 mm | 0.45 – 1.00 mm | 500 – 13000 mm | 5° | |
| Wetterbest | W8 | 8 mm | 865 / 910 / 950 / 1195 mm | 830 / 865 / 925 / 1160 mm | 0.25 – 0.60 mm | 395 – 40000 mm | 8° | |
| Wetterbest | W10 | 10 mm | 870 / 920 / 1150 mm | 828 / 1105 mm | 0.25 – 0.60 mm | 400 – 8000 mm | Nespecificat | |
| Wetterbest | W18 | 18 mm | 1150 mm | 1100 mm | 0.40 – 0.60 mm | 200 – 12500 mm | 9° | |
| Wetterbest | W35 | 35 mm | 1125 mm | 1080 mm | 0.45 – 1.00 mm | 200 – 12500 mm | 7° |
Regula de baza a specificatiilor
Cu cat cuta (inaltimea profilului) este mai mare (de ex. T35, T45 sau T50), cu atat coala de tabla devine mai "ingusta" la latimea utila, deoarece o cantitate mai mare de otel este consumata pentru a forma nervurile inalte.
In schimb, profilul devine considerabil mai rigid si rezistent la greutate sau vant, permitand distante mult mai mari intre panele structurii de sustinere.
Lucrari Finalizate: Dimensiuni & Specificatii Tabla
Garantam executie tehnica impecabila si materiale de calitate superioara pentru fiecare proiect realizat. Iata doua dintre lucrarile noastre etalon recente.
Sistem Rezidential Dimensiuni & Specificatii Tabla
Executie completa pentru o locuinta moderna unifamiliala. S-au realizat masuratori laser tridimensionale, livrare pachet complet de accesorii, montaj folie anticondens cu inalta permeabilitate la vapori si integrarea armonioasa a sistemului de drenaj pluvial.
Renovare Acoperis cu Dimensiuni & Specificatii Tabla
Refacere integrala pentru o vila cu arhitectura clasica. Include decopertarea stratului vechi deteriorat, consolidarea structurala a sarpantei prin dublarea capriorilor, montaj rigle de ventilatie si finisaje impecabile ale doliilor si jgheaburilor.